Close
A sailing yacht, ballast, sloop type was design for recreational cruises.
The project was developed at the Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, Ship and Yacht Design.
Range of navigation II-III, sailing in the open seas to a distance of 50 nautical miles from a port of refuge, with a maximum distance between the two places of refuge up to 100 NM (according to Polish Register of Shipping).
Inside the hull there are two double passenger cabins, a galley, a mess and a head with shower compartment. In the stern there is a storage area for sails, accessories and so on.
The round/bottom hull is made of GRP material (glass reinforced polyester).
Ballast type fin-keel (fin) filled with lead.
The deck with a deckhouse and an open control station in the cockpit.
Bermuda sloop rig. Single-mast, 2 main sails: jib and mainsail.
Length overall 10,92m
Hull beam 3,69m
Light displacement 6280 kg
Standard keel draught 1,99m
Water capacity 200 L
Fuel capacity 150 L
Total standard sail area 67,37 m2
Motor Volvo Penta D1-20,
13,8 kW, S-drive.
Cabins 2 ( 2 x 2 persons)
